Quality Engineer

Location

MLT - Hal Far

Apply by

2026-05-22

Job Role: To support the function of the quality department through the duties outlined below together with any other tasks as assigned by the Quality Manager.

Duties, responsibilities and authorities:

  • Answer customer complaints through 8D report within the requested deadline
  • Ensure that corrective actions in 8D reports are closed on time and reports updated and submitted accordingly
  • Support departments with problem solving
  • Ensure that revised copies of documentation are uploaded in QMS system such that integrity of QMS is maintained.
  • Use equipment in quality lab in order to investigate parts (including customer returned samples)
  • Checking of tool approvals and informing relevant BU of the results
  • Carry out metrological confirmation of equipment as per schedule and procedures
  • Provide part numbers as requested after going through quotation
  • Review and confirmation of inspection plans
  • Carry out MSAs as required
  • Review new quotation requests in terms of quality requirements, including but not limited to dimensions and tolerances, surface quality, certificate requirements and other general requirements.
  • Review and approval of drawings
  • Recognise product safety/special characteristics on drawings and transfer information correctly
  • Ensure department KPIs are met and propose actions to rectify negative results for continuous improvement where applicable.
  • Ensure the promotion of customer focus throughout the organisation
  • Support selection and implementation of appropriate preventive and corrective actions
  • Has the authority to stop shipment or stop production (where applicable) to correct quality problems
  • Inform relevant area management team immediately upon complaint notification to prevent possibility of further nonconforming product to be produced and/or shipped to the customer.
  • Ensure that the Quality Management System (QMS) conforms to the requirements of IATF 16949:2016
  • Report on the performance of the QMS and opportunities for improvement to management (particularly top management)
  • Ensure that the integrity of the QMS is maintained when changes to the QMS are planned and implemented
  • Implement improvements necessary to improve the systems following results of internal and external audits as necessary
    • Monitor implementation of IATF 16949:2016 across all departments within TSS Malta
    • Ensure all Environment, Health and Safety instructions are implemented
    • Ensure safety performance is adequately communicated
    • Participate in risk reduction plans
    • Use any customer portals such as: CAQ, process director etc.
    • Understanding customer requirements and liaising with relevant parties. This includes technical cleanliness for automotive parts.
    • Compliance with the requirements of the ISO 14001 Environmental Management System and ISO 45001 Occupational Health and Safety Management System.
    • Responsible for reporting any hazards / near misses / injuries immediately you’re aware of to the area management.

  • Skills/Education:

    • Bachelor Degree in Engineering (Hons.) or equivalent.
    • Good use of Microsoft Office tools
    • Good understanding of statistics, ideally with a Six Sigma Green Belt or Black Belt training background.
    • Understanding of customer-specific requirements
    • Understanding of applicable core tools
    • Technical understanding of manufacturing process as applicable
    • Understanding of product requirements
    • Understanding how to operate equipment to test parts to check conformance to product requirement, as applicable.
    • Excellent verbal and written communication skills in English.
    • Able to work under own initiative.
    • Able to prioritize tasks as needed to meet deadlines.
    • Able to work with different teams and maintain good working relationships both external and internal customers.
    • Attentive to detail, logical, practical and proactive.

Workplace Culture: 

At Trelleborg Malta, we believe in creating a vibrant and inclusive workplace where your voice matters. You'll be recognized for your contributions and have plenty of opportunities for growth and development. Join us and be part of a team that supports and celebrates each other!



What we offer: 

  • Trelleborg University: Enhance your skills by studying while you work!
  • Career Development: Explore dynamic career paths and learn from our experienced employees.
  • Comprehensive Health Coverage: Benefit from health insurance for you and your dependents.
  • Flexible Working Hours: Customize your schedule to achieve work-life balance.
  • Study Leave: Take advantage of study leave to further your education.
  • Convenient Parking: Enjoy easy, hassle-free parking facilities.
  • Social and Well-Being initiatives: Doctor on site, and frequent social activities


Trelleborg is an equal opportunity employer. Join us and experience a rewarding, balanced work environment!

Apply

The link to your LinkedIn profile can be found here

Apologies, your application wasn't recieved correctly due to what seems like a malformed file. Make sure the file is not corrupt and is of common format, preferably PDF.

privacy policy

Similar jobs

Quality /jobs/307021-quality-engineer
Uopfordret ansøgning til Produktionen hos TSS Helsingør
Manufacturing & Maintenance
DNK - Helsingør
Mitarbeiter*in (m/w/d) operative Logistik
Supply Chain & Logistics
DEU – Gärtringen
Apply by: 2026-05-31
Duales Studium Wirtschaftsinformatik-IMBIT, Studienbeginn 2026 (m/w/d)
Information Technology
DEU - Stuttgart
Apply by: 2026-06-06
Industrielackierer (m/w/d)
Manufacturing & Maintenance
DEU - Velten
Apply by: 2026-05-29
Rubber Manufacturing Associate
Manufacturing & Maintenance
USA - Pawling, NY
Apply by: 2026-08-01
Skilled Manufacturing Moulder
Manufacturing & Maintenance
GBR - Cadley Hill
Apply by: 2026-05-31
Sales Engineer, Singapore
Sales
SGP - Singapore
Apply by: 2026-05-31
Plant Manager
General Management
USA - River Falls
Apply by: 2026-05-13
Marketing Executive - Healthcare & Medical
Marketing & Communications
GBR - Nottingham
Apply by: 2026-05-22
Account Manager (Vertriebsing.) (m/w)
Sales
AUT - Wien
Apply by: 2026-05-30
Senior Cloud Developer, Ahmedabad GUJ
Information Technology
IND - Ahmedabad
Apply by: 2026-06-30
Tooling Engineer
Research & Development / Engineering
USA - Renton, WA
Apply by: 2026-05-30
Painter
Manufacturing & Maintenance
USA - Renton, WA
Apply by: 2026-05-20
Application Engineer, Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-07-31
Quality Engineer
Quality
USA - Louisville, CO
Apply by: 2026-05-30
2nd shift CNC Setup Machinist
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-05-30
Expert Network Manager Europe (m/f/d)
Sales
DEU - Stuttgart
Apply by: 2026-05-22
Project Engineer (Mech), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-05-31
Design Engineer (E&I), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-05-31
PRODUCTION CONTROLLER
Finance
SVN - Kranj
Apply by: 2026-06-30
Production Supervisor
General Management
USA - Renton, WA
Apply by: 2026-05-23
Product Engineer
Manufacturing & Maintenance
USA - Tukwila, WA
Apply by: 2026-05-30
Quality Engineer
Quality
MLT - Hal Far
Apply by: 2026-05-22
Warehouse Associate
Manufacturing & Maintenance
USA - Chalfont, PA
Apply by: 2026-05-24
Customer Service Coordinator (m/f/d)
Manufacturing & Maintenance
DEU - Velten
Apply by: 2026-05-29
Toolmaker Engineering Technician
Manufacturing & Maintenance
GBR - Bridgwater
Apply by: 2026-05-29
Data Center Engineer – Hosting Operations
Information Technology
IND - Bangalore
Apply by: 2026-06-30
Senior Manufacturing Engineer
Manufacturing & Maintenance
USA - Delano, MN
Apply by: 2026-05-23
Project Engineer
Project Management
MLT - Hal Far
Apply by: 2026-05-22
Aerospace Quality Engineer
Quality
USA - Tukwila, WA
Apply by: 2026-05-23
Accountant , Ahmedabad GUJ
Finance
IND - Ahmedabad
Apply by: 2026-05-31
Operations Manager
Manufacturing & Maintenance
USA - Tukwila, WA
Apply by: 2026-06-07
Key Account Manager
Sales
CHN - Pudong
Apply by: 2026-05-31
Sales Representative
Sales
NLD - Dordrecht
Apply by: 2026-05-29
Manager - Application Engineering
Sales
IND - Bangalore
Apply by: 2026-05-31
Customer Service Representative
Sales
USA - Robertsdale, Alabama
Apply by: 2026-05-23
Process Engineer (m/f/d)
Manufacturing & Maintenance
DEU - Velten
Apply by: 2026-05-29
Internal Sales (m/f/d)
Sales
DEU - Velten
Apply by: 2026-05-29
Test Technician
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-05-31
Team Manager - Project Management
Sales
GBR - Westbury
Apply by: 2026-05-29
Aerospace Application Engineer
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-05-10
Mitarbeiter Vertriebsinnendienst (m/w/d)
Sales
DEU - Velten
Apply by: 2026-05-30
Aerospace Process Engineer
Manufacturing & Maintenance
USA - Tukwila, WA
Apply by: 2026-05-30
Customer Service Coordinator (m/f/d)
Manufacturing & Maintenance
DEU - Velten
Apply by: 2026-05-29
Aerospace Application Engineer
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-05-21
Project Engineer (E&I), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-05-31
IS Student AI Analyst - Internship
Information Technology
USA - Plymouth, MN
Apply by: 2026-05-29
CNC Toolmaker, medical manufacturing
Manufacturing & Maintenance
USA - Plymouth, MN
Apply by: 2026-06-13
Industrial Americas Application Engineer
Research & Development / Engineering
CAN - Toronto
Apply by: 2026-06-08
Industrial Americas Sales Engineer
Sales
USA - Seattle, WA
Apply by: 2026-05-29
CNC Setup Operator
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-05-30
Mold Technician- 2nd Shift
Manufacturing & Maintenance
USA - Menomonie, WI
Apply by: 2026-05-30
Buyer
Purchasing
USA - Renton, WA
Apply by: 2026-05-30
Drafting Engineer (E&I), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-06-01
Design Engineer (Mech), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-05-31
Application Engineer (Mech), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-05-31
Sales Engineer
Sales
USA - Remote
Apply by: 2026-05-08
Senior Sales Engineer, Qingdao, China
Sales
CHN - Qingdao
Apply by: 2026-06-30
Internal Sales
Sales
GBR - Leicester
Apply by: 2026-05-29
Material Laboratory Technician
Research & Development / Engineering
IND - Bangalore
Apply by: 2026-05-31
Integration Analyst
Information Technology
USA - Plymouth, MN
Apply by: 2026-05-13
Integration Analyst
Information Technology
USA - Northborough, MA
Apply by: 2026-05-17
Integration Analyst
Information Technology
USA - Paso Robles, CA
Apply by: 2026-05-18
Integration Analyst
Information Technology
USA - Tustin, CA
Apply by: 2026-05-18
HR Advisor
Human Resources
GBR - Cadley Hill
Apply by: 2026-05-22
Technical Analyst - JD Edwards
Information Technology
USA - Plymouth, MN
Apply by: 2026-05-14
Technical Analyst - JD Edwards
Information Technology
USA - Northborough, MA
Apply by: 2026-05-16
Technical Analyst - JD Edwards
Information Technology
USA - Paso Robles, CA
Apply by: 2026-05-18
Technical Analyst - JD Edwards
Information Technology
USA - Tustin, CA
Apply by: 2026-05-18
Senior Full Stack Developer, Ahmedabad GUJ
Information Technology
IND - Ahmedabad
Apply by: 2026-06-30
Project Manager, Vadodara GUJ (Contractual)
Project Management
Apply by: 2026-06-30
Environmental Health and Safety Manager
Manufacturing & Maintenance
USA - Fort Wayne, IN
Apply by: 2026-05-31
Assistenz Logistik (m/w/d)
Supply Chain & Logistics
DEU – Gärtringen
Apply by: 2026-05-22
Process Engineer
Manufacturing & Maintenance
USA - Delano, MN
Apply by: 2026-07-29
Automation Controls Engineer
Research & Development / Engineering
USA - Delano, MN
Apply by: 2026-07-30
Toolmaker or Toolmaker CNC
Manufacturing & Maintenance
Apply by: 2026-07-31
SAP Business Analyst Data Migrations
Information Technology
IND - Bangalore
Apply by: 2026-05-31
Sales Engineer - Distribution (South or Pune)
Sales
IND - Bangalore
Apply by: 2026-05-31
Sales Engineer - Distribution (South)
Sales
IND - Bangalore
Apply by: 2026-05-31
IS Manufacturing & Supply Chain Business Analyst
Information Technology
IND - Ahmedabad
Apply by: 2026-07-23
Extrusion Pilot Line Operator
Manufacturing & Maintenance
USA - Forest City, NC
Apply by: 2026-05-29
Financial Controller
Finance
GBR - Hawarden
Apply by: 2026-05-15
Junior IT PLM System Engineer
Information Technology
IND - Bangalore
Apply by: 2026-05-31
Werkzeugmechaniker / Toolmaker (m/w/d)
Research & Development / Engineering
DEU - Lathen
Apply by: 2026-06-30
Supply Manager, Vadodara GUJ
Supply Chain & Logistics
Apply by: 2026-05-31
IS Business Analyst Team Lead S&D
Information Technology
IND - Ahmedabad
Apply by: 2026-06-27
IS Manufacturing Business Analyst
Information Technology
IND - Ahmedabad
Apply by: 2026-07-25
IS Business Analyst Finance
Information Technology
IND - Ahmedabad
Apply by: 2026-07-25
Business Development Manager
Sales
GBR - Nottingham
Apply by: 2026-05-29
Head of Customer Service
Sales
SWE - Jönköping
Apply by: 2026-05-22
Qualitätskoordinator / Quality Coordinator (m/w/d)
Quality
DEU - Lathen
Apply by: 2026-07-31
Strategic Procurement Director
Supply Chain & Logistics
USA - Rutherfordton, NC
Apply by: 2026-06-13
Quality & HSE Manager
Quality
ITA - Pianezza
Apply by: 2026-05-23
Quality Lead
Quality
USA - Louisville, CO
Apply by: 2026-05-30
Assistant Controller
Finance
USA - Menomonie, WI
Apply by: 2026-06-28
Inspector
Quality
USA - Forest City, NC
Apply by: 2026-06-12
CNC Operator
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-05-30
Manufacturing Engineer
Manufacturing & Maintenance
USA - Paso Robles, CA
Apply by: 2026-10-02
Recruiter - Ahmedabad GUJ
Human Resources
IND - Ahmedabad
Apply by: 2026-05-09
Regional Finance Director
Finance
USA - Fort Wayne, IN
Apply by: 2026-05-31
Labormitarbeiter CTA / Chemiemeister / -techniker (m/w/d)
Research & Development / Engineering
DEU - Lindau
Apply by: 2026-05-10
Lead Mold Technician
Manufacturing & Maintenance
USA - Menomonie, WI
Apply by: 2026-05-29
JD Edwards CNC Administrator
Information Technology
IND - Ahmedabad
Apply by: 2026-06-25
Plant Manager
Manufacturing & Maintenance
USA - River Falls
Apply by: 2026-06-12
Regional Sales Director - Western Americas
Sales
USA - Remote
Apply by: 2026-05-12
Accounts Receivable/Payroll Administrator
Finance
GBR - Retford
Apply by: 2026-05-22
Sales Manager
Sales
GBR - Retford
Apply by: 2026-05-22
Product Manager
Research & Development / Engineering
DNK - Helsingør
Apply by: 2026-05-15
Maintenance Tech
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-05-30
Full Stack Developer, Ahmedabad GUJ
Information Technology
IND - Ahmedabad
Apply by: 2026-05-16
Head of Sales Development Engineering (m/f/d)
Sales
FRA - Maisons-Laffitte
Apply by: 2026-05-16
Customer Manager (m/f/d)
Sales
FRA - Maisons-Laffitte
Apply by: 2026-05-22
Aerospace Project Engineer
Project Management
IND - Bangalore
Apply by: 2026-06-30
Supply Planner
Supply Chain & Logistics
BGR - Sofia
Apply by: 2026-06-01
Sr. Category Purchaser
Supply Chain & Logistics
USA - Fort Wayne, IN
Apply by: 2026-05-16
Regional Finance Director
Finance
USA - Louisville, CO
Apply by: 2026-05-14
CNC Senk- und Drahterodierer / Werzeugmacher (m/w/d)
Manufacturing & Maintenance
CHE - Stein am Rhein
Apply by: 2026-05-20
Customer Support Coordinator (CSC)
Supply Chain & Logistics
USA - Fort Wayne, IN
Apply by: 2026-05-20
Customer Success Advocate (m/w/d)
Sales
DEU - Stuttgart
Apply by: 2026-05-21
Teamleader Accounts Payable (m/w/d)
Finance
DEU - Stuttgart
Apply by: 2026-05-21
Regional Finance Director Elastomers Europe
Finance
GBR - Tewkesbury
Apply by: 2026-05-21
Inside Sales Representative - Automotive
Sales
BGR - Sofia
Apply by: 2026-05-22
QC-medarbejder hos Trelleborg Sealing Solutions Helsingør
Quality
DNK - Helsingør
Apply by: 2026-05-31
TMS Operator (Medical)
Manufacturing & Maintenance
MLT - Hal Far
Apply by: 2026-05-22
Manufacturing Manager - Steel Fabrication and Coating
Manufacturing & Maintenance
VIE - Phu My 3
Apply by: 2026-05-23
Manufacturing Manager - Rubber
Manufacturing & Maintenance
VIE - Phu My 3
Apply by: 2026-05-23
Senior Process Engineer (Steel Fabrication and Coating)
Manufacturing & Maintenance
VIE - Phu My 3
Apply by: 2026-05-23
Customer Service GER/FR/EN
Sales
CHE - Crissier
Apply by: 2026-05-23
Human Resources Director-Americas
Human Resources
USA - Fort Wayne, IN
Apply by: 2026-05-24
Controller:in (ab 30h/Woche bis Vollzeit)
Finance
AUT - Eberstalzell
Apply by: 2026-05-27
Industriteknikerlærling - opstart sommeren 2026
Manufacturing & Maintenance
DNK - Helsingør
Apply by: 2026-05-29
Production Planner
Supply Chain & Logistics
GBR - Retford
Apply by: 2026-05-22
Process Development Engineer
Research & Development / Engineering
USA - Forest City, NC
Apply by: 2026-05-29
Product Development Chemist/Engineer
Research & Development / Engineering
USA - Rutherfordton, NC
Apply by: 2026-05-30
Warehouse Associate
Supply Chain & Logistics
Apply by: 2026-05-25
Sales Team Leader
Sales
VIE - Phu My 3
Apply by: 2026-05-28
IT Infrastructure Engineer – Cloud Services Security & Compliance
Information Technology
GBR - Bridgwater
Apply by: 2026-05-28
Project Manager
Project Management
GBR - Cadley Hill
Apply by: 2026-05-14
CNC Setter Programmer
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-05-29
Maintenance Engineer
Manufacturing & Maintenance
GBR - Cadley Hill
Apply by: 2026-05-14
Automatiktekniker/Reparatør
Manufacturing & Maintenance
DNK - Helsingør
Apply by: 2026-05-29
SAP Business Analyst (m/f/d) User Administration, Roles & Privileges
Information Technology
DEU - Stuttgart
Apply by: 2026-05-30
Team Lead Document Management (m/f/d)
Information Technology
DEU - Stuttgart
Apply by: 2026-05-17
IS System and Process Analyst - Finance
Information Technology
USA - Plymouth, MN
Apply by: 2026-06-26
Quality Manager
Quality
USA - Berryville, VA
Apply by: 2026-05-30
Finance Director
Finance
Apply by: 2026-06-04
Customer Service Advocate
Sales
USA - Fort Wayne, IN
Apply by: 2026-06-03
Polymechaniker/Werkzeugmacher (m/w/d)
Manufacturing & Maintenance
CHE - Algetshausen
Apply by: 2026-06-04
Sales Engineer - Africa
Sales
ARE - Dubai
Apply by: 2026-06-05
Production Area Manager
Manufacturing & Maintenance
GBR - Retford
Apply by: 2026-06-05
Quality Inspector - Rotating Shifts
Manufacturing & Maintenance
GBR - Cadley Hill
Apply by: 2026-05-14
IT Infrastructure Project Manager
Information Technology
IND - Bangalore
Apply by: 2026-07-31
Senior Engineer – Process Engineering (Projects-Capacity & Capability Building)
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-07-31
Senior Engineer – Process Engineering (Documentation)
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-07-31
Senior Engineer – Process Engineering (Capex Lead)
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-07-31
Finance Manager
Finance
AUS - Melbourne
Apply by: 2026-06-06
Engineering Supervisor
Research & Development / Engineering
USA - Menomonie, WI
Apply by: 2026-06-27
Commercial & Sourcing Engineer
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-07-31
Injection Tool design Engineer
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-07-31
Continuous Improvement Lead
Manufacturing & Maintenance
GBR - Tewkesbury
Apply by: 2026-06-07
Sachbearbeiter/in Special Handling Administration (m/w/d)
Supply Chain & Logistics
DEU – Gärtringen
Apply by: 2026-05-24
Quality Assurance Technician (Supplier Quality)
Quality
USA - Rutherfordton, NC
Apply by: 2026-06-06
SAP S/4HANA Teamlead (m/f/d) User Administration, Roles & Privileges
Information Technology
DEU - Stuttgart
Apply by: 2026-06-22
Head of Customer Service FBW & CPI (m/w/d)
Sales
DEU - Stuttgart
Apply by: 2026-06-07
Account Manager (m/w/d) Defence
Sales
DEU - Stuttgart
Apply by: 2026-06-07
Assistant Controller
Finance
Apply by: 2026-06-05
Sales Manager - Residential
Sales
Remote
Apply by: 2026-06-06
Material Laboratory Project Management Intern
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-05-23
Quality Engineer
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-06-08
Legal Entity Controller
Finance
USA - Plymouth, MN
Apply by: 2026-06-28
Quality Engineer
Research & Development / Engineering
USA - El Segundo, CA
Apply by: 2026-06-08