Maintenance Manager

Location

USA - Pawling, NY

Apply by

2026-12-17
Do you enjoy shaping your environment?  Rolling up your sleeves and fixing things?  This may be the job for you!


Job description:

  • Supervise and work alongside Maintenance Technicians and the Facilities/Maintenance Lead. Set priorities, assign work, coach employees, verify workmanship and coordinate coverage and training. Address attendance and performance concerns under company procedures.

  • Independently troubleshoot and repair industrial equipment, including rubber manufacturing presses and microwave curing equipment, focusing on mechanical, hydraulic and pneumatic systems. Lead breakdown response and verify safe return to service.
  • Troubleshoot and repair industrial electrical systems. Read schematics and diagnose three-phase power, motors, starters, contactors, relays, sensors, variable frequency drives and control circuits. Follow electrical safety, qualification and lockout/tagout procedures and use appropriate diagnostic instruments.

  • Plan and perform preventive maintenance; maintain work orders, equipment histories and the backlog. Identify root causes and correct recurring failures. Escalate unresolved problems to the Facilities Manager with findings and support needs.

  • Maintain boilers and steam, compressed air, HVAC, cooling towers, water treatment, ventilation and dust collection. Arrange qualified specialist service when needed and coordinate downtime with Production.

  • Maintain critical spares, obtain quotations and coordinate contractors, routine purchases and completed work within approved budgets. Verify workmanship and follow through on outstanding maintenance needs.

  • Conduct daily facilities walkthroughs. Coordinate building and grounds upkeep, drainage, fire protection, emergency lighting, severe-weather preparation and assigned emergency response.

  • Guide and assist the Facilities Safety Coordinator with weekly inspections, training schedules, records and corrective-action follow-up. Support Safety@Work reporting and safety committee activities.

  • Enforce procedures for guarding, chemical handling, confined spaces, PPE, housekeeping, combustible dust and contractor safety. Support incident and near-miss investigations, document findings, implement corrective actions and escalate significant hazards or compliance concerns.

  • Coordinate assigned environmental inspections, waste documentation and permit-related records. Arrange qualified service providers and prepare information for management or specialist review.

You will have:

  • At least five years of hands-on industrial maintenance and repair experience, including two years supervising employees or leading a maintenance team.
  • Ability to independently diagnose faults, complete electrical and mechanical repairs and restore equipment to reliable operation.
  • Experience implementing safe work practices, maintaining maintenance and EHS records, and completing corrective actions.
  • Journeyman-level industrial electrical troubleshooting and repair skills in three-phase power, wiring, motor controls, schematics and diagnostic instruments.
  • Strong organization, communication and sound technical judgment; ability to balance planning, supervision and hands-on repairs as production priorities change.
  • Ability to use maintenance/work-order software, spreadsheets, email and electronic records to plan work and follow through on corrective actions.

Education and Experience
Required:

  • Electrical or maintenance trade training, apprenticeship, military technical experience, or an equivalent combination of education and practical experience.

Desired:

  • Rubber manufacturing equipment experience especially presses and microwave curing equipment.
  • PLC troubleshooting, boilers, compressed air and environmental recordkeeping are additional assets.
  • Electrical apprenticeship or journeyman training is a plus.

Benefits

  • Medical, dental, and disability benefits
  • Healthcare and dependent care FSA and HSA programs
  • Team shares/bonus/incentive opportunity
  • Paid Time Off
  • Paid Parental Leave
  • Reward and recognition programs
  • Training and development
  • 401(k) retirement savings plan with company match
  • Tuition reimbursement
  • Company Paid Life Insurance: Employee / Spouse / Child
  • Supplemental Disability and Life Plans available
  • Employee Assistance Program (EAP)

Salary Info:
This is a first shift position with a starting rate commensurate with experience, $77,000 to $83,000 Salary

This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.

As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.

Job Type: Full-time

Location: on site

No relocation or sponsorship available

Apply here!

Apply

The link to your LinkedIn profile can be found here

Apologies, your application wasn't recieved correctly due to what seems like a malformed file. Make sure the file is not corrupt and is of common format, preferably PDF.

privacy policy

Similar jobs

Manufacturing & Maintenance /jobs/321306-maintenance-manager
Uopfordret ansøgning til Produktionen hos TSS Helsingør
Manufacturing & Maintenance
DNK - Helsingør
Gruppenleitung (m/w/d) operative Logistik
Supply Chain & Logistics
DEU – Gärtringen
Apply by: 2026-12-16
Duales Studium Wirtschaftsinformatik-Data Science, Studienbeginn 2027 (m/w/d)
Information Technology
DEU - Stuttgart
Apply by: 2027-08-31
Duales Studium Wirtschaftsinformatik-IMBIT, Studienbeginn 2027 (m/w/d)
Information Technology
DEU - Stuttgart
Apply by: 2027-08-31
Rubber Manufacturing Associate
Manufacturing & Maintenance
USA - Pawling, NY
Apply by: 2026-12-31
Skilled Manufacturing Moulder
Manufacturing & Maintenance
GBR - Cadley Hill
Apply by: 2026-12-31
Painter
Manufacturing & Maintenance
USA - Renton, WA
Apply by: 2026-12-31
Application Engineer, Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-11-30
CNC Setup Machinist
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-11-28
Quality Manager
Quality
USA - Pawling, NY
Apply by: 2026-12-31
Toolmaker Engineering Technician
Manufacturing & Maintenance
GBR - Bridgwater
Apply by: 2026-12-31
Accountant , Ahmedabad GUJ
Finance
IND - Ahmedabad
Apply by: 2026-12-01
Operations Manager
Manufacturing & Maintenance
USA - Tukwila, WA
Apply by: 2027-01-30
Sales Engineer - Medical Device Manufacturing
Sales
USA - Remote
Apply by: 2026-11-30
Senior Backend Developer, Ahmedabad GUJ
Information Technology
IND - Ahmedabad
Apply by: 2026-11-30
Junior IT PLM Engineer
Information Technology
IND - Bangalore
Apply by: 2026-12-31
Senior IT PLM System Engineer
Information Technology
IND - Bangalore
Apply by: 2026-11-30
Werkzeugmechaniker / Toolmaker (m/w/d)
Research & Development / Engineering
DEU - Lathen
Apply by: 2027-01-31
Junior Design Engineer, Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-12-31
Senior Frontend Developer, Ahmedabad GUJ
Information Technology
IND - Ahmedabad
Apply by: 2026-12-31
Team Lead Document Management (m/f/d)
Information Technology
DEU - Stuttgart
Apply by: 2026-11-30
IS System and Process Analyst - Finance
Information Technology
USA - Plymouth, MN
Apply by: 2026-11-30
Manufacturing Support Operator
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-11-28
Tool Designer, medical manufacturing
Research & Development / Engineering
USA - Delano, MN
Apply by: 2026-12-11
Trainee Design Engineer, Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Quality Inspector
Quality
USA - Renton, WA
Apply by: 2026-12-30
Logistics Coordinator
Supply Chain & Logistics
NLD - Dordrecht
Apply by: 2026-11-27
Shift Technician
Manufacturing & Maintenance
MLT - Hal Far
Apply by: 2026-11-20
Quality Inspector II
Quality
USA - Renton, WA
Apply by: 2026-12-28
Financial Controller
Finance
NDL - Rotterdam
Apply by: 2026-11-27
Technical Engineer
Research & Development / Engineering
CHN - Qingdao
Apply by: 2026-12-31
General Operator
Manufacturing & Maintenance
USA - Fort Wayne, IN
Apply by: 2031-10-31
CNC Lathe Machining
Manufacturing & Maintenance
USA - Fort Wayne, IN
Apply by: 2031-11-02
Production Supervisor - Second Shift
Manufacturing & Maintenance
USA - Seattle, WA
Apply by: 2026-12-31
Design Engineer, Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-11-30
Account Manager (m/w/d) Fluidpower
Sales
DEU - Stuttgart
Apply by: 2026-11-20
CNC Machinist
Manufacturing & Maintenance
USA - Renton, WA
Apply by: 2026-12-30
Injection Molding Processor
Manufacturing & Maintenance
USA - Renton, WA
Apply by: 2026-11-29
SAP Business Analyst (m/w/d) Logistics & Warehousing
Information Technology
DEU - Stuttgart
Apply by: 2026-12-04
Value Stream Supervisor
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-11-30
Customer Service Rep
Sales
USA - Northborough, MA
Apply by: 2026-11-27
China Digital Marketing & Operations Lead
Marketing & Communications
CHN - Qingdao
Apply by: 2026-12-31
Production Manager (Rubber), Vadodara GUJ
Manufacturing & Maintenance
IND - Vadodara
Apply by: 2026-12-31
Buyer
Purchasing
USA - Chalfont, PA
Apply by: 2026-12-13
Assistant Controller
Finance
USA - Northborough, MA
Apply by: 2027-01-01
Jr. IT Technical Architect - Manufacturing Applications & Digital Engineering
Information Technology
IND - Ahmedabad
Apply by: 2026-11-30
Sr. JDE Business Analyst
Information Technology
USA - Fort Wayne, IN
Apply by: 2027-01-01
FEA Engineer, Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-12-31
Customer Support Coordinator
Sales
USA - Chalfont, PA
Apply by: 2027-01-01
Human Resources Manager (m/w/d)
Human Resources
CHE - Stein am Rhein
Apply by: 2026-11-30
Aerospace Application Engineer
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-12-17
Manufacturing Engineer
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-11-28
Aerospace Sales Engineer
Sales
USA - Seattle, WA
Apply by: 2026-12-12
SAP Business Analyst Data Migrations
Information Technology
IND - Bangalore
Apply by: 2026-11-30
Junior Material Compliance Engineer (One Year Fixed Term Employment)
Research & Development / Engineering
IND - Bangalore
Apply by: 2026-11-30
BA Controller
Finance
SWE - Trelleborg
Apply by: 2026-11-30
Customer Quality & Complaints Specialist
Quality
BGR - Sofia
Apply by: 2026-11-27
IS Business Analyst – Sales and Finance
Information Technology
Apply by: 2026-12-31
Cost Accountant, Vadodara, GUJ
Finance
IND - Vadodara
Apply by: 2026-12-31
Admin Assistant, Vadodara, GUJ
Administration
IND - Vadodara
Apply by: 2027-01-01
HR Generalist (IR), Vadodara, GUJ
Human Resources
IND - Vadodara
Apply by: 2026-12-31
Purchase Engineer_ Vadodara GUJ
Supply Chain & Logistics
IND - Vadodara
Apply by: 2026-12-31
Sales Team Manager
Sales
Europe
Apply by: 2026-11-27
Engineer - Quality
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-11-30
Sr Facilities Engineer_Vadodara, GUJ
Manufacturing & Maintenance
IND - Vadodara
Apply by: 2026-12-31
Facilities Engineer, Vadodara, GUJ
Manufacturing & Maintenance
IND - Vadodara
Apply by: 2026-12-31
Jr Project Engineer, Vadodara, GUJ
Manufacturing & Maintenance
IND - Vadodara
Apply by: 2026-12-31
Technical Engineer, Vadodara, GUJ
Manufacturing & Maintenance
IND - Vadodara
Apply by: 2026-12-31
Engineering Internship-Summer 2027
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-11-22
IS Junior Support Analyst
Information Technology
IND - Ahmedabad
Apply by: 2026-11-21
Business Controller Europe (m/f/d)
Finance
CHE - Stein am Rhein
Apply by: 2026-11-30
Regional Director of Operations Americas
General Management
USA - Denver, CO
Apply by: 2026-12-06
Commercial Director - Key Accounts
Sales
USA - Rutherfordton, NC
Apply by: 2026-12-05
Buyer
Supply Chain & Logistics
USA - Northborough, MA
Apply by: 2026-11-30
Quality Lead-Receiving Inspection
Quality
USA - Fort Wayne, IN
Apply by: 2026-12-18
Customer Service Representative
Supply Chain & Logistics
USA - Fort Wayne, IN
Apply by: 2027-01-01
Technical Sales Manager - Materials, Fillers & Composites
Sales
USA - Randolph, MA
Apply by: 2026-11-20
Jr Accountant
Finance
IND - Ahmedabad
Apply by: 2026-12-31
Human Resources Manager
Human Resources
USA - Renton, WA
Apply by: 2026-12-19
Business Development Executive
Sales
GBR - Nottingham
Apply by: 2026-11-27
Human Resources Business Partner
Human Resources
GBR - Nottingham
Apply by: 2026-11-27
Quality Assurance Engineer
Quality
USA - Pawling, NY
Apply by: 2026-11-28
Customer Support Coordinator
Sales
USA - Renton, WA
Apply by: 2027-01-22
EHS Manager
Quality
USA - Seattle, WA
Apply by: 2027-01-22
Value Stream Manager
General Management
USA - Renton, WA
Apply by: 2026-12-25
Junior Account Manager Automotive, Cuneo Italy
Sales
ITA - Cuneo
Apply by: 2026-12-04
Production Planner
Supply Chain & Logistics
USA - Seattle, WA
Apply by: 2026-11-27
Injection Mold Operator
Manufacturing & Maintenance
USA - Renton, WA
Apply by: 2026-11-28
Quality Manager (m/w/d)
Quality
CHE - Stein am Rhein
Apply by: 2026-11-30
Quality Assurance Engineer
Quality
GBR - Retford
Apply by: 2026-11-27
Integration Analyst
Information Technology
USA - Northborough, MA
Apply by: 2026-12-31
Office Assistant
Administration
GBR - Retford
Apply by: 2026-11-27
Strategic Sourcing Manager
Supply Chain & Logistics
USA - Plymouth, MN
Apply by: 2027-03-29
Plant Manager
General Management
GBR - Cadley Hill
Apply by: 2026-11-30
Sales Manager
Sales
SGP - Singapore
Apply by: 2026-11-27
Regional Service & Spare parts Manager
Sales
GBR - Hawarden
Apply by: 2026-11-27
Process Engineer Injection Molding
Research & Development / Engineering
USA - Louisville, CO
Apply by: 2026-12-26
Manufacturing Industry Planner / Customer Service
Supply Chain & Logistics
USA - Pawling, NY
Apply by: 2026-12-30
Quality & EHS Technician
Quality
USA - Berryville, VA
Apply by: 2026-11-29
Plant Purchaser
Purchasing
USA - Berryville, VA
Apply by: 2026-11-29
Electrical Engineer
Research & Development / Engineering
NLD - Dordrecht
Apply by: 2026-11-27
Mechanical Designer
Research & Development / Engineering
NLD - Dordrecht
Apply by: 2026-11-27
Production Supervisor
Manufacturing & Maintenance
USA - Fort Wayne, IN
Apply by: 2026-12-16
Regional Sales Director - Houston, TX
Sales
USA - Houston, TX
Apply by: 2026-11-21
Process Administrator
Research & Development / Engineering
GBR - Cadley Hill
Apply by: 2026-11-19
Regional Sales Manager - Houston, TX
Sales
USA - Houston, TX
Apply by: 2026-11-22
Finance Executive (Two Years Fixed Term)
Finance
IND - Bangalore
Apply by: 2026-12-31
Technical Account Manager
Sales
DEU - Langen
Apply by: 2026-11-23
Plant Controller
Finance
USA - Rutherfordton, NC
Apply by: 2026-11-21
Aerospace Sales Engineer-Aftermarket
Sales
USA - Remote Texas
Apply by: 2026-12-25
Aerospace Application Engineer
Research & Development / Engineering
USA - El Segundo, CA
Apply by: 2026-11-23
R&D Material Laboratory Intern
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-12-13
Material Laboratory Technician
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-12-13
Product Engineer
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2026-12-13
Innovation Center Director
Research & Development / Engineering
Apply by: 2027-02-28
Manufacturing Engineer
Manufacturing & Maintenance
MLT - Hal Far
Apply by: 2026-11-20
Supply Chain Manager
Supply Chain & Logistics
GBR - Leicester
Apply by: 2026-11-23
Sales Engineer - Oil & Gas
Sales
USA - Houston, TX
Apply by: 2026-11-22
Regional Procurement Leader Americas
Purchasing
USA - Fort Wayne, IN
Apply by: 2026-11-21
CNC Operator
Manufacturing & Maintenance
IND - Bangalore
Apply by: 2026-12-31
Mechanical Design Engineer – Tooling
Manufacturing & Maintenance
BGR - Pernik
Apply by: 2026-11-27
Design Engineer
Research & Development / Engineering
NDL - Rotterdam
Apply by: 2026-11-26
Buyer
Purchasing
USA - Seattle, WA
Apply by: 2026-11-24
Applications Engineer
Research & Development / Engineering
Apply by: 2026-11-26
Aerospace Sales Engineer-Aftermarket
Sales
USA - Remote Arizona
Apply by: 2026-12-23
SAP Business Analyst (m/w/d) Logistics & Warehousing
Information Technology
POL - Czechowice
Apply by: 2026-11-29
Integration Engineer (EDI & eInvoicing) (m/f)
Information Technology
POL - Czechowice
Apply by: 2026-11-29
Senior Financial Analyst
Finance
USA - Randolph, MA
Apply by: 2026-12-05
Project Manager,Operations
Project Management
Apply by: 2027-01-31
Software Validation Engineer
Information Technology
IND - Ahmedabad
Apply by: 2026-11-28
Tool Maker
Manufacturing & Maintenance
MLT - Hal Far
Apply by: 2026-11-30
Warehouse Supervisor
Supply Chain & Logistics
CAN - Toronto
Apply by: 2026-11-28
Injection Molding Setup Operator
Manufacturing & Maintenance
USA - Louisville, CO
Apply by: 2026-11-28
Supply Chain Manager
Supply Chain & Logistics
USA - Louisville, CO
Apply by: 2026-11-28
Sales Engineer_Semiconductor
Sales
KOR - Yongin
Apply by: 2026-12-03
Sales Engineer_Busan Office
Sales
KOR - Busan
Apply by: 2026-12-03
Directeur Technique Global F/H
Project Management
FRA - Maisons-Laffitte
Apply by: 2026-12-03
Application Engineer
Sales
FIN - Vantaa
Apply by: 2026-11-30
Assistant Accountant
Finance
GBR - Tewkesbury
Apply by: 2026-12-03
Health, Safety, Environment, and Quality Coordinator
Manufacturing & Maintenance
AUS - Melbourne
Apply by: 2026-12-11
Customer Service Representative
Sales
USA - Rutherfordton, NC
Apply by: 2026-12-02
Accounts Assistant
Finance
GBR - Bridgwater
Apply by: 2026-11-30
Customer Support Coordinator (CSC)
Sales
USA - Fort Wayne, IN
Apply by: 2026-12-20
Senior Accountant_Ahmedabad, Guj
Finance
IND - Ahmedabad
Apply by: 2027-02-28
Design Engineer (E&I), Ahmedabad GUJ
Research & Development / Engineering
IND - Ahmedabad
Apply by: 2026-12-06
Cost Accountant
Finance
USA - River Falls
Apply by: 2026-12-04
Senior Quality Inspector
Quality
GBR - Rotherham
Apply by: 2026-12-08
Human Resources Manager
Human Resources
AUS - Melbourne
Apply by: 2026-12-07
Industrial Engineer, Kiikka, Finland
Manufacturing & Maintenance
FIN - Sastamala
Apply by: 2026-12-09
Werkstudent (m/w/d) Digital Marketing
Marketing & Communications
DEU - Stuttgart
Apply by: 2026-12-09
Human Resources Manager-LCA & R&D
Human Resources
USA - Fort Wayne, IN
Apply by: 2026-12-20
Lead FAIR Engineer
Quality
GBR - Cadley Hill
Apply by: 2026-11-30
CNC Manufacturing Engineer
Manufacturing & Maintenance
GBR - Rotherham
Apply by: 2026-12-10
Production Planner
Supply Chain & Logistics
USA - Louisville, CO
Apply by: 2026-12-08
Accountant - Kiikka, Finland
Finance
FIN - Tampere
Apply by: 2026-12-11
Sales Manager
Sales
NDL - Rotterdam
Apply by: 2026-11-20
Accountant
Finance
USA - Houston, TX
Apply by: 2026-11-29
Workshop Technician
Supply Chain & Logistics
NLD - Dordrecht
Apply by: 2026-11-27
Operator -1st Shift
Manufacturing & Maintenance
USA - Northborough, MA
Apply by: 2027-01-30
Werkstudent (m/w/d) Global Marketing and Communications
Marketing & Communications
DEU - Stuttgart
Apply by: 2026-12-13
Customer Service Coordinator (1 year FTC)
Manufacturing & Maintenance
DEU - Velten
Apply by: 2026-12-13
Customer Service Coordinator (6 months FTC)
Sales
FIN - Tampere
Apply by: 2026-12-13
Production Planner
Supply Chain & Logistics
USA - Fort Wayne, IN
Apply by: 2027-02-13
Talent Acquisition Partner
Human Resources
USA - Plymouth, MN
Apply by: 2026-11-28
Aerospace Quality Inspector
Quality
USA - Chalfont, PA
Apply by: 2026-12-15
Aerospace Sales Engineer-Aftermarket
Sales
USA - Remote California
Apply by: 2026-12-13
Strategic Business Developer
Finance
SWE - Trelleborg
Apply by: 2026-12-03
Senior Accountant (m/w/d)
Finance
CHE - Stein am Rhein
Apply by: 2026-12-17
Data & Sustainability Analyst Intern
Information Technology
SWE - Trelleborg
Apply by: 2026-11-30
Working Student (m/f/d) Materials Compliance
Research & Development / Engineering
DEU - Stuttgart
Apply by: 2026-12-17
MPS Supply Planner
Supply Chain & Logistics
USA - Fort Wayne, IN
Apply by: 2027-01-01
Technical Sourcing Lead
Research & Development / Engineering
USA - Fort Wayne, IN
Apply by: 2027-01-13
Digital Marketing Communications Specialist
Marketing & Communications
CRI - Grecia
Apply by: 2026-12-14
Quality Engineer
Quality
POL - Czechowice
Apply by: 2026-12-18
Logistics Coordinator
Supply Chain & Logistics
NLD - Dordrecht
Apply by: 2026-12-25
Ingénieur Qualité Aéronautique (H/F)
Quality
FRA - Maisons-Laffitte
Apply by: 2027-04-30
Customer Success Lead - East Region - Team Lehman
Sales
USA - Fort Wayne, IN
Apply by: 2026-12-16
Customer Success Lead - Central Region - Team Jindrich
Sales
USA - Fort Wayne, IN
Apply by: 2026-12-18
Customer Success Lead - Central Region - Team Weigel
Sales
USA - Menomonee Falls, WI
Apply by: 2026-12-18
Customer Success Lead - West Region - Team Coon
Sales
USA - Fresno, CA
Apply by: 2026-12-18
Warehouse Associate
Manufacturing & Maintenance
USA - Fort Wayne, IN
Apply by: 2026-12-17
Senior Analyst - SAP Sales Cloud
Information Technology
IND - Bangalore
Apply by: 2026-12-31
Køkkenchef til inhouse-kantine
Human Resources
DNK - Helsingør
Apply by: 2026-12-10
Process Improvement & Finance Analysis Specialist
Finance
BGR - Pernik
Apply by: 2026-12-20
Cost Estimator
Research & Development / Engineering
USA - Pawling, NY
Apply by: 2026-12-18
Maintenance Manager
Manufacturing & Maintenance
USA - Pawling, NY
Apply by: 2026-12-17
Customer Support Coordinator
Sales
Apply by: 2026-12-16